Specifications + Dimensions
| 60 Hz / 1800 rpm: | 126 kW 145 kW 160 kW |
| Voltage Regulation: | +/- 0.5% |
| Frequency Droop Control: | Isochronous 0% |
| Phase and Power Factor: | Three phase - 0.8 power factor std. |
| Generator Full Load Temperature Rise: | 110°C temperature rise at 45°C ambient |
| Inline Cylinders/ Aspiration: | I-4 / Turbocharged + Aftercooled |
| Displacement - cid (ltr): | 293 (4.8) |
| Bore/Stroke - inches (mm): | 4.13/5.39 (105/137) |
| Fuel Injection Pump Type and Control: | Electronic (HPCR) |
| (Heat Exchanger standard) | |
| Heat Rejection to Jacket Water -1800 rpm BTU min | C/F |
| Freshwater Pump Capacity - gpm (lpm) | 55 (210) |
| Heat Exchanger Approx. Cooling Capacity - gal (ltr) | 9.7 (37) |
| Engine Only Approximate Capacity - gal (ltr) | 8.2 (31) |
| Raw Water Pump Capacity - gpm (lpm) | 47 (177) |
| Max. Raw Water Pump Suction Head Lift - in (mm) | 39 (1000) |
| Raw Water Pump Inlet Hose ID - in (mm) | 2 (51) |
| Min. Raw Water Inlet/Discharge Thru-Hull - in (mm) | 2 (51) |
See Specification Sheet for more details
See Specification Sheet for more details
See Specification Sheet for more details
See Specification Sheet for more details
See Specification Sheet for more details
Features + Benefits
- EPA Tier III at 60 Hz compliant.
- Four cylinder, four cycle, inline, liquid cooled, overhead valve marine diesels with replaceable wet liners.
- Forged crankshaft.
- Individual cylinder heads for ease of service.
- Mass balancer improves vibration levels.
- Heavy-duty, plate-type oil cooler.
- Shaker pistons with oil gallery for improved cooling and performance.
See Specification Sheet for more details
- Positive displacement gear-type oil pump.
- Full flow, spin-on oil filter.
- Oil spray cooling reduces piston crown temperature.
- Jacket-water, plate-type, full flow oil cooler reduces heat and prevents lube oil breakdown.
- Large capacity oil pan.
- A closed loop crankcase vent traps oil vapor to keep the engine room clean.
See Specification Sheet for more details
See Specification Sheet for more details
See Specification Sheet for more details
See Specification Sheet for more details
See Specification Sheet for more details
Note:
- Prime kW ratings for 3Ø at 0.8 power factor. Consult factory for deration factors.
- Based on prime kW rating at 1800 and 1500 RPM. Fuel rate may vary depending on operating conditions.
Dimensions are subject to change without notice, they are not intended for installations.
Contact a factory representative for the current installation data.
